• jmiller@lemm.ee
    link
    fedilink
    English
    arrow-up
    18
    ·
    3 个月前

    Gold prices have risen steadily for a long time, partly because of its use in electronics. Over $2500/ounce now. But another quirk of gold is the ease with which we can make very thin coatings of it over other materials, sometimes only a few atoms thick. So it is commonly used, but in very very small amounts per device.

      • chaogomu@lemmy.world
        link
        fedilink
        English
        arrow-up
        6
        arrow-down
        2
        ·
        3 个月前

        The main reason to electroplate things in gold is that corrosion resistance.

        The thinner the coating, the better. Mostly because gold isn’t a very good conductor.

        Copper is one of the best conductors available. But the corrosion is the problem. It’s nonconductive.

        Also a fun fact. Stainless steel is a better conductor than gold. But gold is slightly easier to use in electroplating.

        • werefreeatlast@lemmy.world
          link
          fedilink
          English
          arrow-up
          6
          ·
          3 个月前

          I think you might want to do a little digging in your undergrad science books:

          The units of electrical conductivity are measured in siemens per meter (S/m). Here’s the electrical conductivity of a few metals:

          Stainless Steel: 1.0 - 1.5 × 10^6 S/m
          Aluminum: 3.77 × 10^7 S/m
          Copper: 5.96 × 10^7 S/m
          Gold: 4.52 × 10^7 S/m
          Silver: 6.30 × 10^7 S/m
          

          In this list silver has the highest conductivity, and stainless steel the lowest conductivity.

    • Wanderer@lemm.ee
      link
      fedilink
      English
      arrow-up
      2
      ·
      3 个月前

      If someone works out how to make gold cheap. Then the current value of all gold will collapse and there were be a huge supply of shit that’s been covered in dust in a vault for 100 years.

      • jmiller@lemm.ee
        link
        fedilink
        English
        arrow-up
        2
        ·
        3 个月前

        Very true. Unfortunately, this process just pulls gold from dilute sources and gathers it into nuggets, from small ones to very very large. No gold is being made new though, that would be great.

      • jmiller@lemm.ee
        link
        fedilink
        English
        arrow-up
        4
        arrow-down
        1
        ·
        edit-2
        3 个月前

        Well, that is the amount gold that is mined or recycled every year that is used in electronics. The thing is though, a lot of the gold used in electronics is never recovered. So a considerable amount of the gold used in electronics is removed from from circulation in a way the gold in jewelry or bullion or coins isn’t. It isn’t the primary driver of gold’s price increase, but it is a significant factor.